Help
AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:
groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points Clicking the white area beneath the suspension point name
nom The nominal length between suspension point and main riser loop.
rdg The actual reading from your measurement device. When measuring, rdg is the input field.
diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
status Color coded dots are shown for manual, imported & laser values
Also take a look at the Manual

Result

 …  2025-09-30 16:09 UTC 2024-08-05 16:48 UTC

Ozone Zeno 2 MS (2022)

General Information
ManufacturerOzone Paragliders LTD
ModelZeno 2
Year2022
SizeMS
Production date2022-01
Line chartOpen
Total airtime249h
Line set airtime10h
Tolerance +/- 10mm (Review)
Data integrity & access
  • Contains manual values

Settings

The deviation of the measured values from the nominal values is between 104 and 129mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

A1a
A2a
A3a
A4a
A1b
A2b
A3b
A4b

BR1

B1
B2
B3
B4
C1
C2
C3
C4

AR2

A5a
A6a
A7a
A8a
A5b
A6b
A7b
A8b

BR2

B5
B6
B7
B8
C5
C6
C7
C8

AR3

A9
A10
A11
A12
A13
A14
B12
B13
B14

BR3

B9
B10
B11

AR1

A1a
A2a
A3a
A4a
A1b
A2b
A3b
A4b

BR1

B1
B2
B3
B4
C1
C2
C3
C4

AR2

A5a
A6a
A7a
A8a
A5b
A6b
A7b
A8b

BR2

B5
B6
B7
B8
C5
C6
C7
C8

AR3

A9
A10
A11
A12
A13
A14
B12
B13
B14

BR3

B9
B10
B11
Offsets relative to median diff (118)
AR1
BR1
AR2
BR2
AR3
BR3
AR1
BR1
AR2
BR2
AR3
BR3

Left riser

nom:
7552.63
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
260 11 1.88 32/100 high
66 16 1.75 35/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A1a
nom:
7651
rdg:
7773
diff:
A2a
nom:
7543
rdg:
7663
diff:
A3a
nom:
7506
rdg:
7634
diff:
A4a
nom:
7539
rdg:
7665
diff:
A1b
nom:
7636
rdg:
7757
diff:
A2b
nom:
7528
rdg:
7645
diff:
A3b
nom:
7492
rdg:
7620
diff:
A4b
nom:
7526
rdg:
7640
diff:
nom:
7561.63
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "edelrid-800X-190-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
340 10 1.9 32/100 high
99 14 2.55 31/100 high
11 20 2.5 30/100 high
6 24 3.79 30/100 medium
 
From
To Count Median Spread Quality Evidence
287 4 1.53 34/100 high
19 12 2.7 30/100 high
5 14 1.41 31/100 medium
 
From
To Count Median Spread Quality Evidence
38 7 2.71 34/100 high
22 9 2.58 36/100 high
15 10 2.35 41/100 high
 
From
To Count Median Spread Quality Evidence
27 4 1.27 33/100 high
4 7 3.05 30/100 medium
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B1
nom:
7614
rdg:
7725
diff:
B2
nom:
7517
rdg:
7625
diff:
B3
nom:
7481
rdg:
7600
diff:
B4
nom:
7502
rdg:
7606
diff:
C1
nom:
7680
rdg:
7792
diff:
C2
nom:
7586
rdg:
7695
diff:
C3
nom:
7548
rdg:
7661
diff:
C4
nom:
7565
rdg:
7674
diff:
nom:
7285.50
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
260 11 1.88 32/100 high
66 16 1.75 35/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A5a
nom:
7435
rdg:
7562
diff:
A6a
nom:
7281
rdg:
7404
diff:
A7a
nom:
7206
rdg:
7331
diff:
A8a
nom:
7233
rdg:
7354
diff:
A5b
nom:
7425
rdg:
7554
diff:
A6b
nom:
7273
rdg:
7397
diff:
A7b
nom:
7201
rdg:
7323
diff:
A8b
nom:
7230
rdg:
7349
diff:
nom:
7295.88
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
170 10 1.82 30/100 high
31 13 1.39 34/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B5
nom:
7399
rdg:
7510
diff:
B6
nom:
7262
rdg:
7380
diff:
B7
nom:
7186
rdg:
7299
diff:
B8
nom:
7197
rdg:
7314
diff:
C5
nom:
7475
rdg:
7585
diff:
C6
nom:
7336
rdg:
7448
diff:
C7
nom:
7255
rdg:
7368
diff:
C8
nom:
7257
rdg:
7374
diff:
nom:
6889.67
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,A14,B12,B13,B14

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
170 10 1.82 30/100 high
31 13 1.39 34/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
A9
nom:
6992
rdg:
7104
diff:
A10
nom:
6871
rdg:
6985
diff:
A11
nom:
6806
rdg:
6917
diff:
A12
nom:
6761
rdg:
6887
diff:
A13
nom:
6742
rdg:
6861
diff:
A14
nom:
6782
rdg:
6902
diff:
 
 
 
B12
nom:
6769
rdg:
6878
diff:
B13
nom:
6778
rdg:
6900
diff:
B14
nom:
6805
rdg:
6923
diff:
nom:
6913.33
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "liros-dsl-140/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
139 9 2.35 37/100 high
22 13 2.35 36/100 high
 
From
To Count Median Spread Quality Evidence
25 4 1.87 36/100 high
5 15 2.1 72/100 high
 
From
To Count Median Spread Quality Evidence
3 10 1.35 34/100 medium
 
From
To Count Median Spread Quality Evidence
 
B9
nom:
6992
rdg:
7113
diff:
B10
nom:
6894
rdg:
7012
diff:
B11
nom:
6854
rdg:
6968
diff:

Right riser

nom:
7552.63
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
260 11 1.88 32/100 high
66 16 1.75 35/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A1a
nom:
7651
rdg:
7777
diff:
A2a
nom:
7543
rdg:
7667
diff:
A3a
nom:
7506
rdg:
7631
diff:
A4a
nom:
7539
rdg:
7662
diff:
A1b
nom:
7636
rdg:
7757
diff:
A2b
nom:
7528
rdg:
7644
diff:
A3b
nom:
7492
rdg:
7615
diff:
A4b
nom:
7526
rdg:
7644
diff:
nom:
7561.63
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "edelrid-800X-190-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
340 10 1.9 32/100 high
99 14 2.55 31/100 high
11 20 2.5 30/100 high
6 24 3.79 30/100 medium
 
From
To Count Median Spread Quality Evidence
287 4 1.53 34/100 high
19 12 2.7 30/100 high
5 14 1.41 31/100 medium
 
From
To Count Median Spread Quality Evidence
38 7 2.71 34/100 high
22 9 2.58 36/100 high
15 10 2.35 41/100 high
 
From
To Count Median Spread Quality Evidence
27 4 1.27 33/100 high
4 7 3.05 30/100 medium
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B1
nom:
7614
rdg:
7719
diff:
B2
nom:
7517
rdg:
7623
diff:
B3
nom:
7481
rdg:
7590
diff:
B4
nom:
7502
rdg:
7608
diff:
C1
nom:
7680
rdg:
7787
diff:
C2
nom:
7586
rdg:
7695
diff:
C3
nom:
7548
rdg:
7655
diff:
C4
nom:
7565
rdg:
7669
diff:
nom:
7285.50
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
260 11 1.88 32/100 high
66 16 1.75 35/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A5a
nom:
7435
rdg:
7562
diff:
A6a
nom:
7281
rdg:
7406
diff:
A7a
nom:
7206
rdg:
7333
diff:
A8a
nom:
7233
rdg:
7359
diff:
A5b
nom:
7425
rdg:
7551
diff:
A6b
nom:
7273
rdg:
7396
diff:
A7b
nom:
7201
rdg:
7325
diff:
A8b
nom:
7230
rdg:
7354
diff:
nom:
7295.88
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
170 10 1.82 30/100 high
31 13 1.39 34/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B5
nom:
7399
rdg:
7510
diff:
B6
nom:
7262
rdg:
7382
diff:
B7
nom:
7186
rdg:
7300
diff:
B8
nom:
7197
rdg:
7311
diff:
C5
nom:
7475
rdg:
7588
diff:
C6
nom:
7336
rdg:
7455
diff:
C7
nom:
7255
rdg:
7373
diff:
C8
nom:
7257
rdg:
7378
diff:
nom:
6889.67
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,A14,B12,B13,B14

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
170 10 1.82 30/100 high
31 13 1.39 34/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
A9
nom:
6992
rdg:
7109
diff:
A10
nom:
6871
rdg:
6990
diff:
A11
nom:
6806
rdg:
6921
diff:
A12
nom:
6761
rdg:
6883
diff:
A13
nom:
6742
rdg:
6864
diff:
A14
nom:
6782
rdg:
6902
diff:
 
 
 
B12
nom:
6769
rdg:
6887
diff:
B13
nom:
6778
rdg:
6896
diff:
B14
nom:
6805
rdg:
6923
diff:
nom:
6913.33
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "liros-dsl-140/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
139 9 2.35 37/100 high
22 13 2.35 36/100 high
 
From
To Count Median Spread Quality Evidence
25 4 1.87 36/100 high
5 15 2.1 72/100 high
 
From
To Count Median Spread Quality Evidence
3 10 1.35 34/100 medium
 
From
To Count Median Spread Quality Evidence
 
B9
nom:
6992
rdg:
7108
diff:
B10
nom:
6894
rdg:
7012
diff:
B11
nom:
6854
rdg:
6964
diff:

Continue trimming procedure

inject html